ICP Multi Element Calibration standard, 15 Elements accreditated to Test Method 200.8 in 5% HNO3 & tr. HF

• Catalog number
  REICPCAL15B
• Price
  Please ask
• Size
  100ml

• Diagnostic or laboratory reagents
  3822 0000
• Substance expires after days
  730
• Use of chemical
  Anion & Cation
• Application
  ICP Multi Element Calibration
• Substance specification
  Multi
• Handling advice
  hazardous
• UN Nr
  1760
• ADE CLASS PG TUNNEL
  II 8 E
• GHS Signal
  Danger
• ADR explanation
  CORROSIVE LIQUID, N.O.S. (NITRIC ACID)
• Awareness
  3.2/1B Causes severe skin burns and eye damage.3.3/1 Causes serious eye damage.
• Precautions
  3.2, 1B Causes severe skin burns and eye damage.3.3, 1 Causes serious eye damage.P260 Do not breathe dust, fume, gas, mist, vapours, spray.P280 Wear protective gloves, protective clothing, eye protection, face protection.P264 Wash thoroughly after handling.P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water, shower.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P310a Immediately call a POISON CENTER, doctor.P321 Specific treatment (see on this label).P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P363 Wash contaminated clothing before reuse.P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.P405 Store locked up.P501a Dispose of contents, container in accordance with local, regional, national, international regulations.

• Gene target
  ICP   Element   Calibration   Elements   accreditated   Test   Method   200   HNO3  
• Short name
  ICP Multi Element Calibration standard, 15 Elements accreditated Test Method 200 8 in 5% HNO3 & tr. HF
• Technique
  Standard, multi, multi, standards
• Alternative name
  ICP Multi Element Calibration reference, 15 Elements accreditated to Test measurement 200.8 in 5% HNO3 & tr. HF
• Alternative technique
  standards, tests

MeSH Data

• Name
  Calibration
• Concept
  Scope note: Determination, by measurement or comparison with a standard, of the correct value of each scale reading on a meter or other measuring instrument; or determination of the settings of a control device that correspond to particular values of voltage, current, frequency or other output.
• Tree numbers
  • E05.978.155
• Qualifiers
  standards

Similar products