Instant ELISA Kit for Pepsin (PP)

• CAS Number:

  7732-18-5

• Applications:

  Enzyme-linked immunosorbent assay for Antigen Detection.

• Assay Principle:

  This assay employs the competitive inhibition enzyme immunoassay technique. A monoclonal antibody specific to Instant Pepsin (PP) has been pre-coated onto a microplate. A competitive inhibition reaction is launched between biotin labeled Instant Pepsin (PP) and unlabeled Instant Pepsin (PP) (Standards or samples) with the pre-coated antibody specific to Instant Pepsin (PP) . After incubation the unbound conjugate is washed off. Next, avidin conjugated to Horseradish Peroxidase (HRP) is added to each microplate well and incubated. The amount of bound HRP conjugate is reverse proportional to the concentration of Instant Pepsin (PP) in the sample. After addition of the substrate solution, the intensity of color developed is reverse proportional to the concentration of Instant Pepsin (PP) in the sample.

• Assay Protocol:

  1. Prepare all reagents, samples and standards;
  2. Add 50µ L standard or sample and 50µ L Detection Reagent A to each well. Incubate 1 hours at 37° C;
  3. Aspirate and wash 3 times;
  4. Add 90µ L Substrate Solution. Incubate 10-20 minutes at 37° C;
  5. Add 50µ L Stop Solution. Read at 450nm immediately.
  

• Assay Performance Time:

  1H, 10min

• Sample Type:

  Serum, plasma, tissue homogenates, cell lysates, cell culture supernates and other biological fluids

• Detection Range:

  2.47 - 200 ng/mL

• Precision:

  Intra-assay Precision (Precision within an assay) : 3 samples with low, middle and high level Instant Pepsin (PP) were tested 20 times on one plate, respectively.
  Inter-assay Precision (Precision between assays) : 3 samples with low, middle and high level Instant Pepsin (PP) were tested on 3 different plates, 8 replicates in each plate.
  CV (%) = SD/meanX100
  Intra-Assay: CV<10%
  Inter-Assay: CV<12%
  

• Sensitivity:

  The minimum detectable dose of this kit is typically less than 0.94ng/mL

• Stability:

  The stability of kit is determined by the loss rate of activity. The loss rate of this kit is less than 5% within the expiration date under appropriate storage condition.
  To minimize extra influence on the performance, operation procedures and lab conditions, especially room temperature, air humidity, incubator temperature should be strictly controlled. It is also strongly suggested that the whole assay is performed by the same operator from the beginning to the end.

• Specificity:

  This assay has high sensitivity and excellent specificity for detection of Instant Pepsin (PP) .
  No significant cross-reactivity or interference between Instant Pepsin (PP) and analogues was observed.

• Method:

  Competitive Inhibition

• Organism Species:

  Homo sapiens (Human)