ICP Multi Element Calibration standard,20 Elements accreditated to Test Method 6020 in 2% HNO3&tr. Tart Acid
-
Catalog number
REICPCAL20A
-
Price
Please ask
-
Size
100ml
-
-
Diagnostic or laboratory reagents
3822 0000
-
Substance expires after days
730
-
Use of chemical
Anion & Cation
-
Application
ICP Multi Element Calibration
-
Substance specification
Multi
-
Handling advice
not toxic
-
UN Nr
1760
-
ADE CLASS PG TUNNEL
III 8 E
-
GHS Signal
Warning
-
ADR explanation
CORROSIVE LIQUID, N.O.S. (NITRIC ACID)
-
Awareness
3.2/2 Causes skin irritation.3.3/2A Causes serious eye irritation.
-
Precautions
3.1.O, 2 Fatal if swallowed.3.2, 1B Causes severe skin burns and eye damage.3.3, 1 Causes serious eye damage.P260 Do not breathe dust, fume, gas, mist, vapours, spray.P280 Wear protective gloves, protective clothing, eye protection, face protection.P264 Wash thoroughly after handling.P270 Do not eat, drink or smoke when using this product.P301+P310a IF SWALLOWED: Immediately call a POISON CENTER, doctor.P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water, shower.P305+P351+P338 IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.P321 Specific treatment (see on this label).P304+P340 IF INHALED: Remove person to fresh air and keep comfortable for breathing.P363 Wash contaminated clothing before reuse.P301+P330+P331 IF SWALLOWED: rinse mouth. Do NOT induce vomiting.P405 Store locked up.
-
Gene target
-
Short name
ICP Multi Element Calibration standard 20 Elements accreditated Test Method 6020 in 2% HNO3 tr. Tart Acid
-
Technique
Standard, multi, multi, standards
-
Alternative name
ICP Multi Element Calibration reference,20 Elements accreditated to Test measurement 6020 in 2% HNO3&tr. Tart Acid
-
Alternative technique
standards, tests
-
MeSH Data
-
Name
-
Concept
Scope note:
Determination, by measurement or comparison with a standard, of the correct value of each scale reading on a meter or other measuring instrument; or determination of the settings of a control device that correspond to particular values of voltage, current, frequency or other output.
-
Tree numbers
-
Qualifiers
standards
Similar products